Five Tips for Choosing the Right Sump Pump for Your Basement

Basement sump pump installation

Are you researching basement sump pump installation? If you live in a home with a basement, you know that it’s not if your basement is going to flood, but a matter of when. Over 80% of homes with basements flood at least once, and that statistic goes up if your home sits on a lower elevation or live in a particularly wet area. This is where basement sump pump installation comes in to play. When you invest in basement sump pump installation, the water that would be all over the floor of your basement gets pulled through the basement sump pump installation and channeled out away from your home. When you have a basement sump pump installation, you remain warm and dry at times that would otherwise leave you knee-deep in a flood.

The thing is, not all basement sump pumps are exactly the same. For the cost that you’re going to invest in your basement sump pump installation, it would be a crying shame if it doesn’t actually do its job when you need it to. We know you want to make sure that you choose a sump pump that adequately protects you in case of a flood, and so we’ve put together a guide for choosing the right sump pump:

Five Tips for Choosing the Right Sump Pump for Your Basement

  1. Ask for advice.
    Every basement and flood risk is as unique as a snowflake. There is no guide book or website that you can Google that knows your exact challenges or needs. This is why you should always talk to a sump pump expert when determining your sump pump needs.

    We’ll throw this in for free. If you are worried the sump pump sales person you’re talking to is just trying to upsell you on the most expensive sump pump system they have, without any concern for your actual needs, make sure you talk to the actual contractors who would be doing the work. The technicians who install sump pumps often also specialize in water well sealing, provide water tanks, and well drilling services; they know water and they know water flow. They can size up your basement and make sure you find the sump pump protection that will leave you high and dry (but in the good way).

  2. Go for a submersible pump, if you can.
    There are two kinds of basement sump pumps: submersible pumps and pedestal pumps. If your sump basin is fairly narrow, a pedestal pump is a good option for protecting you from flooding in a tight space. However, if you have the room, a submersible pump has a lot of advantages. A submersible pump is covered with a lid, so you don’t hear the pumping noise when it goes to work, which can be irritating. The lid also protects the pump itself by preventing dust and debris from getting in, which could clog it. Not to mention, the airtight lid keeps the moisture from the sump pump out of your basement, and reduces that musty basement smell that you probably don’t relish.

  3. Invest in a cast iron pump core. Sump pumps either have a cast iron or plastic core. The cast iron cores last a lot longer because it transfers the heat from the pump motor into the water, while the plastic core just absorbs it. You want the most life from your pump, and a cast iron core will do that for you.

  4. Protect your pump from clogs. If your sump pump gets clogged, it provides the same effectiveness of having no sump pump at all. In order to prevent clogs in your sump pump, make sure that your pump has a screen-less intake design and an impellor, so that solid up to a half in in size can pass through without clogging the pump.

  5. Opt for a mechanical switch. A mechanical switch is more reliable than their pressure switch cousins. Also, make sure the float is solid, so it can’t get waterlogged and fail to pull the switch into the “off” position. If this happens, it will burn your pump out. In the industry, we call that “no bueno.”

We want to hear from you! Do you have any great tips for choosing a sump pump? Please add them in the comment section below.

Leave a reply

Your email address will not be published. Required fields are marked *